Crawford 升降板/調整板/登車橋系列

手動調整板
Crawford manual dock levellers

Manual dock levelers provide an economical, reliable solution for basic dock leveler applications. Acting as the bridge between your facility and the truck bed, manual levelers offers ease of use and zero energy costs.
手動調整板
Crawford DL6010SM swingdock minidock

正常長度 ： 700 mm（應要求提供其它尺寸）
正常寬度 ： 1250、2000、2200 mm
負載能力 ： 40 kN (4 tonnes)、60 kN (6 tonnes)
垂直工作範圍 ： 超越碼頭達 100 mm，低於碼頭到 100 mm
平台撕裂板厚度 ： 4/6 mm
乘載平台最大值 ： 6.5 N / mm² (8 mm tear plate)
延伸板材料 ： 鋼
坡道安裝樣式 : 內崁式
橡膠緩衝器 : RB 250x250x90、RB 500x250x90
歐洲標準 ： EN 1398 Dock levellers

Crawford DL6010SM swingdock minidock is a manually operated dock leveler, specifically developed for operators of fleets of standardized vehicles with the same bed height. It is equipped with a gas spring, making it easy for one person to operate. It also meets the demands of most loading operations and fulfils all ergonomic requirements. The lip of Crawford DL6010SM swingdock minidock is made of steel. The shape of the lip is extremely flat and the design of the rear connection to the dock edge is bump-free, resulting in a smooth passage between building and truck bed. The outstanding feature of the minidock compared to other manual dock levelers is that the installation can be equipped with buffers, facilitating the most efficient docking process. The truck back up against the buffers until it reaches the right position.
手動調整板
Crawford drawbridge levelers DB6050F fix version and DB6050MZ

The Crawford drawbridge from ASSA ABLOY Entrance Systems is the best solution for open ramps and for servicing vehicles of roughly the same size. The Crawford DB6050F drawbridge leveller fix version is installed in a fix position. When not in use, the drawbridge is secured in the vertical position with a safety lock.
The Crawford drawbridge from ASSA ABLOY Entrance Systems is the best solution for open ramps and for servicing vehicles of roughly the same size. The Crawford DB6050M drawbridge leveller movable version is installed in a guidance rails placed in the front edge of the ramp. When not in use, the drawbridge is secured in the vertical position with a safety lock
手動調整板
Crawford DB6050KBS drawbridge leveler

Crawford DB6050KBS drawbridge leveler can be moved sideways in a guide rail principally designed for external applications. It is the flexible solution for the lower working range up to about 135 mm level equalization. Being made of aluminum, the leveler lightweight and easy to handle. A non-slip surface makes it extra safe. It is also robust, easy to clean and maintenance free.
手動調整板
Crawford DB6050SKB drawbridge leveler

Crawford DB6050SKB drawbridge leveler can be installed in two different ways. It is either fixed in position by welding directly to a solid steel profile in the dock edge or movable sideways in a guide rail. It is designed for the medium working range up to about 200 mm level equalization. The leveler is very easy to handle, being lightweight. A non-slip surface makes it extra safe. It is also robust, easy to clean and maintenance-free.
手動調整板
Crawford DP6050AWB drawbridge leveler

The Crawford DP6050AWB dock plate is the optimal solution when the frequency of goods does not justify an expensive stationary docking system or to overcome bottleneck caused by high loading frequency at existing docking stations. It is designed for loading and unloading with hand pallet trucks, roll cages and trolleys.